Astro install guide

Add Velo to Astro

Install the Velo cookie banner and Google Consent Mode v2 on Astro with one line in your shared layout. With admin access to the site, most installs take a few minutes. If you use Google Tag Manager, this page covers that route too.

Instructions and image sources reviewed 7 November 2026.

Works with the platforms you build on

WordPressShopifyWebflowWixHubSpotPrestaShopDrupalBigCommerceShopwareNext.jsAstroSquare

What you need on Astro

Before you start

  • Where. src/layouts/Layout.astro → head
  • Plan. Any Astro project
  • Goes live. After your next deploy
  • Typical time. About five minutes

Once it is live

  • Your banner follows the defaults you set for each visitor’s region.
  • Tags wait until the visitor has chosen.
  • Every choice is recorded, and Consent Mode v2 passes it on to your Google tags.
CMConsent Mode v2GPCGlobal Privacy ControlEUGDPRUSUS state laws

Two ways to install Velo on Astro

Pick the route that matches how your site already loads its tags. Both end with the same banner and the same signals.


Paste one line into your layout

Add your site’s snippet to the site-wide head, then publish and test it on the live site. If your measurement tags already run through Google Tag Manager, use the route further down instead.

Use Tag Manager? Skip the code

If Google Tag Manager is already on your site, this is the easiest way to add Velo. There’s no code to touch, it takes four short steps, and all your tags stay in one place.

About five minutesTypical time to install on Astro
After your next deployWhen the banner goes live
1,500Monthly sessions on the Free plan, for one site
If you use ClientRouter, Astro replaces the whole page body on each navigation, which removes the banner and the button that reopens it. Add the short second script from step 2 and both stay. Without ClientRouter, every link is a full page load and you don’t need that script.
!
One thing to watchAstro install
See every supported platform

Everything a consent setup needs

The same banner, records and scans on every plan. Pro adds unlimited sites, unlimited scans and your own logo.


Your banner asks in the visitor’s language and follows the defaults you set for their region.

Every choice is recorded, and Consent Mode v2 passes it on to your Google tags.


Google Consent Mode v2Advanced mode on every plan, with a Google Tag Manager template.
Rules by visitor countryOpt in where the law asks for it, and stricter rules for up to 60 countries.
US privacy lawsAn opt out banner with a “Do not sell or share” option.
Global Privacy ControlGPC signals are honoured on every plan.
Reject as easy as acceptReject sits next to accept on the first layer.
The visitor’s languagePicked from their browser, with your own banner text in each language.
Layouts and themesCorner, bar or centred box, in your colours, light or dark.
A/B test your bannerRun 2 to 8 versions of the banner side by side.
Consent logEvery decision is kept for 3 years, with receipt lookup by ID.
Consent dashboardAccept and reject rates over 7 to 90 days.
Cookie and tracker scansCategories from known signatures, plus AI suggestions that you approve.
Script blockingScripts wait for their consent category before they run.

Paste one line into your layout

Add your site’s snippet to the site-wide head, then publish and test it on the live site. If your measurement tags already run through Google Tag Manager, use the route further down instead.

Copy the line

Copy the complete installation snippet for this site from your Velo dashboard. The example below shows the format; replace your-site-id before using it. Keep the API endpoint supplied by your dashboard.

Example snippet
<script src="https://cdn.veloconsent.com/v1/velo.js" data-api="https://app-staging.veloconsent.com" data-velo-site="your-site-id" async></script>

Paste it into your shared layout

Open the layout every page shares, usually src/layouts/Layout.astro. Paste your complete Velo snippet inside <head>, above any analytics or advertising tags, and add is:inline to the script tag so Astro leaves it exactly as written. If the layout uses <ClientRouter />, Astro replaces the body on every navigation, and that removes the banner. To keep it, add an is:inline script in the same head that stores #velo-banner-host and #velo-reopener-host on astro:before-swap and appends them to document.body on astro:after-swap. Then build and deploy.

Astro · shared layout
<!-- src/layouts/Layout.astro: the layout every page shares -->
<html lang="en">
  <head>
    <meta charset="utf-8" />
    <!-- Paste the complete Velo snippet from your dashboard here, then add is:inline. -->
    <script is:inline src="https://cdn.veloconsent.com/v1/velo.js"
            data-api="https://app-staging.veloconsent.com"
            data-velo-site="your-site-id" async></script>

    <!-- Only if this layout uses <ClientRouter />: keeps the banner across page swaps. -->
    <script is:inline>
      document.addEventListener('astro:before-swap', () => {
        window.veloHosts = [...document.querySelectorAll('#velo-banner-host, #velo-reopener-host')];
      });
      document.addEventListener('astro:after-swap', () => {
        document.body.append(...window.veloHosts);
      });
    </script>
  </head>
  <body>
    <slot />
  </body>
</html>
Configuration reference checked against the platform documentation. This is not an admin screenshot. Verified configuration reference · 7 November 2026. Platform documentation ↗

Publish and check the live site

Save and publish the change using the platform steps above, then clear any site or CDN cache. Open the published URL in a fresh browser session. Check the banner where your region rules require it, test accepting and rejecting, and verify consent defaults and updates before your measurement tags run. Confirm the site appears as installed in your Velo dashboard.

Velo’s banner with its default look. Your banner’s copy, colours and region settings may differ.

Use Tag Manager? Skip the code

If Google Tag Manager is already on your site, this is the easiest way to add Velo. There’s no code to touch, it takes four short steps, and all your tags stay in one place.

The complete Tag Manager guide

Add Velo to Tag Manager

Open the Velo template, click Add to workspace, then pick your container. Open the Velo template ↗

Paste your site ID

In Tag Manager, open Tags and click New. Click Tag Configuration, choose Velo CMP and paste your site ID. You’ll find it in your Velo dashboard. Leave everything else as it is.

Make it load first

Click Triggering, choose Consent Initialization – All Pages, then click Save. This lets Velo start before your other tags.

Publish and check it

Click Submit, then Publish. Preview alone doesn’t put Velo live. Then open your site in a private window, try the banner, and check that it shows as installed in your Velo dashboard.

Or hand it to an agent

Copy the prompt into Claude, ChatGPT, Cursor or whichever assistant you already use. It carries everything on this page: both routes, the order the tags have to load in, and the checks that prove it worked.

Install with AI

The prompt

Paste this prompt into your assistant, then provide your site ID and the complete installation snippet or GTM settings from your Velo dashboard.

Install prompt · Astro
Install Velo on Astro.

Current guide: https://veloconsent.com/astro

Before editing, get my site ID and complete installation snippet or GTM settings from the Velo dashboard. Confirm which consent tool and measurement tags already run on the site.

Choose one installation route:
A. If the site already uses Google Tag Manager, add the Velo CMP template (published by veloconsent) from the Community Template Gallery. Set my site ID, theme and API endpoint from the dashboard. Review the advanced options; ads_data_redaction and url_passthrough default to off. Use Consent Initialization – All Pages, then Preview and verify consent before publishing. Full steps: https://veloconsent.com/google-tag-manager

B. For direct installation: In the layout every page shares, usually src/layouts/Layout.astro, paste your complete Velo snippet inside <head>, above any analytics or advertising tags, and add is:inline to the script tag so Astro leaves it exactly as written. If the layout uses <ClientRouter />, Astro replaces the body on every navigation, which removes the banner: in the same head, add an is:inline script that stores #velo-banner-host and #velo-reopener-host on astro:before-swap and appends them to document.body on astro:after-swap. Build and deploy.

Preserve unrelated code. Avoid duplicate Velo installs or competing consent defaults. Do not assume a head placement or async loading alone guarantees tag order.

Check the published site in a fresh session. Verify the banner under the configured region rules, initial consent defaults, accept/reject updates and the velo_consent_update event. Check that non-Google tags follow their assigned categories. Test a second page and any separate checkout surface. Confirm signals reach the Velo dashboard.

Report what changed, where it changed and the result of each check. Describe any missing access or checks you could not complete.
Working with an agent that reads the web? Point it at veloconsent.com/llms.txt and /install.md for the same context in plain text.

From the journal

Notes on cookie banners, Consent Mode and the data that goes missing between them.


Do Canadian websites need Google Consent Mode v2?
V
The Velo journal11 November 2026

Google Consent Mode v2 in Velo: what is new

2 November 2026Read the post

How to set up Google Consent Mode v2 on Shopify

2 September 2026Read the post

Common questions about Velo on Astro

Which Astro sites does this cover?

Any Astro project with a shared layout, whether it’s static or server rendered, because the tag sits in the HTML the layout outputs. We tested the steps on Astro 7 with static output.

Do I have to add is:inline?

It’s the safe default. Astro already leaves any script with attributes other than src as written, so the snippet stays intact either way, and is:inline makes that explicit. Keep the data attributes exactly as your dashboard shows them.

The banner disappears when I click a link.

That’s ClientRouter replacing the page body when visitors navigate. Add the second script from step 2 to the same head, and the banner and the button that reopens it carry over to each new page. Astro’s transition:persist doesn’t help here, because Velo adds those elements after the page has loaded.

My site has more than one layout.

Put the snippet in the base layout the others wrap. If your layouts don’t share one, add it to each. Velo ignores a second copy on the same page, but check that the banner shows in every section of the site.

Will it slow the site down?

The dashboard snippet loads asynchronously. As with any script, measure its effect on your site and check your tag order; asynchronous loading alone does not guarantee consent defaults run before other tags.

Can an AI assistant do this for me?

Yes. Copy the prompt in Install with agents, just below, into Claude, ChatGPT, Cursor or whichever assistant you already use. It carries the steps on this page, the order the tags have to load in, and the checks the agent has to run before it tells you the job is done.

Free for one site

Banner, scan and consent records for one site, free. Pro from €7 a month, plus VAT, for unlimited sites.