Wix install guide

Add Velo to Wix

Install the Velo cookie banner and Google Consent Mode v2 on Wix. You can add the Velo Consent: Cookie Banner app from the Wix App Market, paste one line in Settings → Custom code → Head, or install through Google Tag Manager.

Instructions and image sources reviewed 9 November 2026.

Works with the platforms you build on

WordPressShopifyWebflowWixHubSpotPrestaShopDrupalBigCommerceShopwareNext.jsAstroSquare

What you need on Wix

Before you start

  • Where. Velo Consent app · or Custom Code → Head
  • Plan. Free up to 10,000 sessions/mo via Wix app · or Premium plan
  • Goes live. On connect or apply
  • Typical time. About two minutes

Once it is live

  • Your banner follows the defaults you set for each visitor’s region.
  • Tags wait until the visitor has chosen.
  • Every choice is recorded, and Consent Mode v2 passes it on to your Google tags.
CMConsent Mode v2GPCGlobal Privacy ControlEUGDPRUSUS state laws

Two ways to install Velo on Wix

Pick the route that matches how your site already loads its tags. Both end with the same banner and the same signals.


Install with the Wix app, or use Custom code

Velo Consent: Cookie Banner is on the Wix App Market. It adds the banner to your site head automatically and passes visitor choices to Wix’s cookie consent settings. Prefer not to use the app? Paste one line in Custom Code or use Google Tag Manager.

Use Tag Manager? Skip the code

If Google Tag Manager is already on your site, this is the easiest way to add Velo. There’s no code to touch, it takes four short steps, and all your tags stay in one place.

About two minutesTypical time to install on Wix
On connect or applyWhen the banner goes live
1,500Monthly sessions on the Free plan, for one site
The banner only runs on your published site, so you won’t see it in the editor preview. Whichever route you use, keep Wix’s own cookie banner switched off so only one layer talks to your visitors and to Google.
!
One thing to watchWix install
See every supported platform

Everything a consent setup needs

The same banner, records and scans on every plan. Pro adds unlimited sites, unlimited scans and your own logo.


Your banner asks in the visitor’s language and follows the defaults you set for their region.

Every choice is recorded, and Consent Mode v2 passes it on to your Google tags.


Google Consent Mode v2Advanced mode on every plan, with a Google Tag Manager template.
Rules by visitor countryOpt in where the law asks for it, and stricter rules for up to 60 countries.
US privacy lawsAn opt out banner with a “Do not sell or share” option.
Global Privacy ControlGPC signals are honoured on every plan.
Reject as easy as acceptReject sits next to accept on the first layer.
The visitor’s languagePicked from their browser, with your own banner text in each language.
Layouts and themesCorner, bar or centred box, in your colours, light or dark.
A/B test your bannerRun 2 to 8 versions of the banner side by side.
Consent logEvery decision is kept for 3 years, with receipt lookup by ID.
Consent dashboardAccept and reject rates over 7 to 90 days.
Cookie and tracker scansCategories from known signatures, plus AI suggestions that you approve.
Script blockingScripts wait for their consent category before they run.

Install with the Wix app, or use Custom code

Velo Consent: Cookie Banner is on the Wix App Market. It adds the banner to your site head automatically and passes visitor choices to Wix’s cookie consent settings. Prefer not to use the app? Paste one line in Custom Code or use Google Tag Manager.

Add Velo Consent from the Wix App Market

Open the Velo Consent: Cookie Banner listing on the Wix App Market and click Add to Site. Sign in to Wix if asked, choose your site and confirm the access the app asks for. Prefer not to use the app? Jump to the Custom Code steps or Google Tag Manager below. Add to Wix site

Velo Consent: Cookie Banner on the Wix App Market
The Velo Consent: Cookie Banner listing on the Wix App Market. Click Add to Site to start. Live interface capture · 9 November 2026. Wix App Market ↗

Connect to Velo in your Wix dashboard

Open Velo Consent in your Wix dashboard and click Connect to Velo. Sign in or create a free Velo account, then link an existing Velo site or create one for this Wix site. The app is free on Wix for up to 10,000 sessions a month, with Pro at $5/month via Wix.

Check the live site

As soon as you connect, the app adds the Velo banner script to your site head and the app page marks the head script as Active. If it says Pending sync, click Install banner script. Each visitor’s choice goes to Wix’s own cookie consent settings so Wix tools follow it, alongside Google Consent Mode v2. Publish your site if you have unpublished changes, open it in a private window to test accepting and rejecting, and confirm the site appears as installed in your Velo dashboard.

Velo’s banner with its default look. Your banner’s copy, colours and region settings may differ.

Prefer not to use the app? Paste one line in Custom Code

Add your site’s snippet to the site-wide head in Settings → Custom Code, then publish and test it on the live site.

Copy the line

Copy the complete installation snippet for this site from your Velo dashboard. The example below shows the format; replace your-site-id before using it. Keep the API endpoint supplied by your dashboard.

Example snippet
<script src="https://cdn.veloconsent.com/v1/velo.js" data-api="https://app-staging.veloconsent.com" data-velo-site="your-site-id" async></script>

Add Custom Code in the dashboard

Open Settings → Custom Code, then Add Custom Code. Name the entry Velo, paste the complete snippet, choose All pages and Head, and apply. Your Wix site must be published with a connected domain.

Wix: Custom Code
Wix’s Custom Code list. Choose Add Custom Code for Velo, then select Head and All pages. The pictured entry is Wix’s example, not a Velo installation. Official documentation image, reviewed 23 September 2026. Wix documentation ↗

Publish and check the live site

Save and publish the change using the platform steps above, then clear any site or CDN cache. Open the published URL in a fresh browser session. Check the banner where your region rules require it, test accepting and rejecting, and verify consent defaults and updates before your measurement tags run. Confirm the site appears as installed in your Velo dashboard.

Use Tag Manager? Skip the code

If Google Tag Manager is already on your site, this is the easiest way to add Velo. There’s no code to touch, it takes four short steps, and all your tags stay in one place.

The complete Tag Manager guide

Add Velo to Tag Manager

Open the Velo template, click Add to workspace, then pick your container. Open the Velo template ↗

Paste your site ID

In Tag Manager, open Tags and click New. Click Tag Configuration, choose Velo CMP and paste your site ID. You’ll find it in your Velo dashboard. Leave everything else as it is.

Make it load first

Click Triggering, choose Consent Initialization – All Pages, then click Save. This lets Velo start before your other tags.

Publish and check it

Click Submit, then Publish. Preview alone doesn’t put Velo live. Then open your site in a private window, try the banner, and check that it shows as installed in your Velo dashboard.

Or hand it to an agent

Copy the prompt into Claude, ChatGPT, Cursor or whichever assistant you already use. It carries everything on this page: both routes, the order the tags have to load in, and the checks that prove it worked.

Install with AI

The prompt

Paste this prompt into your assistant, then provide your site ID and the complete installation snippet or GTM settings from your Velo dashboard.

Install prompt · Wix
Install Velo on Wix.

Current guide: https://veloconsent.com/wix

Before editing, get my site ID and complete installation snippet or GTM settings from the Velo dashboard. Confirm which consent tool and measurement tags already run on the site.

Choose one installation route:
A. If the site already uses Google Tag Manager, add the Velo CMP template (published by veloconsent) from the Community Template Gallery. Set my site ID, theme and API endpoint from the dashboard. Review the advanced options; ads_data_redaction and url_passthrough default to off. Use Consent Initialization – All Pages, then Preview and verify consent before publishing. Full steps: https://veloconsent.com/google-tag-manager

B. For direct installation: Open Settings → Custom Code, then Add Custom Code. Name the entry Velo, paste the complete snippet, choose All pages and Head, and apply. Your Wix site must be published with a connected domain.

Preserve unrelated code. Avoid duplicate Velo installs or competing consent defaults. Do not assume a head placement or async loading alone guarantees tag order.

Check the published site in a fresh session. Verify the banner under the configured region rules, initial consent defaults, accept/reject updates and the velo_consent_update event. Check that non-Google tags follow their assigned categories. Test a second page and any separate checkout surface. Confirm signals reach the Velo dashboard.

Report what changed, where it changed and the result of each check. Describe any missing access or checks you could not complete.
Working with an agent that reads the web? Point it at veloconsent.com/llms.txt and /install.md for the same context in plain text.

From the journal

Notes on cookie banners, Consent Mode and the data that goes missing between them.


Do Canadian websites need Google Consent Mode v2?
V
The Velo journal11 November 2026

Google Consent Mode v2 in Velo: what is new

2 November 2026Read the post

How to set up Google Consent Mode v2 on Shopify

2 September 2026Read the post

Common questions about Velo on Wix

Which Wix plan do I need?

The Velo Consent: Cookie Banner app on the Wix App Market has a free tier for up to 10,000 sessions a month, and Pro is $5/month via Wix. Without the app, custom code on Wix needs a Premium plan and a connected domain, the same as any tracking tag. Either way, most installs take a few minutes.

Wix shows its own cookie banner. Do I keep it?

No. Switch the built-in banner off so Velo is the only layer talking to your visitors and to Google. When you use the Velo Consent Wix app from the Wix App Market, it passes each visitor’s choice to Wix’s cookie consent settings automatically.

Why is the banner not in the editor preview?

Wix only runs custom code on the published site. Publish, open the live address and you’ll see the banner. The Velo console confirms the install from the first real visit.

Will it slow the site down?

The dashboard snippet loads asynchronously. As with any script, measure its effect on your site and check your tag order; asynchronous loading alone does not guarantee consent defaults run before other tags.

Can an AI assistant do this for me?

Yes. Copy the prompt in Install with agents, just below, into Claude, ChatGPT, Cursor or whichever assistant you already use. It carries the steps on this page, the order the tags have to load in, and the checks the agent has to run before it tells you the job is done.

Free for one site

Banner, scan and consent records for one site, free. Pro from €7 a month, plus VAT, for unlimited sites.