WordPress install guide

Add Velo to WordPress

Install the Velo cookie banner and Google Consent Mode v2 on WordPress with the Velo Consent plugin. With admin access to the site, most installs take a few minutes. If you’d rather not add a plugin, you can paste one line into your site header or use Google Tag Manager instead.

Instructions and image sources reviewed 23 September 2026.

Works with the platforms you build on

WordPressShopifyWebflowWixHubSpotPrestaShopDrupalBigCommerceShopwareNext.jsAstroSquare

What you need on WordPress

Before you start

  • Where. Settings → Velo Consent
  • Plan. Plugin-enabled WordPress
  • Goes live. On connect
  • Typical time. About two minutes

Once it is live

  • Your banner follows the defaults you set for each visitor’s region.
  • Tags wait until the visitor has chosen.
  • Every choice is recorded, and Consent Mode v2 passes it on to your Google tags.
CMConsent Mode v2GPCGlobal Privacy ControlEUGDPRUSUS state laws

Two ways to install Velo on WordPress

Pick the route that matches how your site already loads its tags. Both end with the same banner and the same signals.


Install the Velo Consent plugin

The Velo Consent plugin sets up your cookie banner and Google Consent Mode v2 in a couple of clicks, and connects to the WP Consent API. Prefer not to add a plugin? Paste one line in your header or use Google Tag Manager instead.

Use Tag Manager? Skip the code

If Google Tag Manager is already on your site, this is the easiest way to add Velo. There’s no code to touch, it takes four short steps, and all your tags stay in one place.

About two minutesTypical time to install on WordPress
On connectWhen the banner goes live
1,500Monthly sessions on the Free plan, for one site
Already running Complianz, CookieYes, Cookie Notice or another consent plugin? Deactivate it before Velo goes live, as the status checklist under Settings → Velo Consent reminds you. Two banners confuse visitors, and two tools writing Consent Mode defaults send Google conflicting signals.
!
One thing to watchWordPress install
See every supported platform

Everything a consent setup needs

The same banner, records and scans on every plan. Pro adds unlimited sites, unlimited scans and your own logo.


Your banner asks in the visitor’s language and follows the defaults you set for their region.

Every choice is recorded, and Consent Mode v2 passes it on to your Google tags.


Google Consent Mode v2Advanced mode on every plan, with a Google Tag Manager template.
Rules by visitor countryOpt in where the law asks for it, and stricter rules for up to 60 countries.
US privacy lawsAn opt out banner with a “Do not sell or share” option.
Global Privacy ControlGPC signals are honoured on every plan.
Reject as easy as acceptReject sits next to accept on the first layer.
The visitor’s languagePicked from their browser, with your own banner text in each language.
Layouts and themesCorner, bar or centred box, in your colours, light or dark.
A/B test your bannerRun 2 to 8 versions of the banner side by side.
Consent logEvery decision is kept for 3 years, with receipt lookup by ID.
Consent dashboardAccept and reject rates over 7 to 90 days.
Cookie and tracker scansCategories from known signatures, plus AI suggestions that you approve.
Script blockingScripts wait for their consent category before they run.

Install the Velo Consent plugin

The Velo Consent plugin sets up your cookie banner and Google Consent Mode v2 in a couple of clicks, and connects to the WP Consent API. Prefer not to add a plugin? Paste one line in your header or use Google Tag Manager instead.

Install from WordPress.org

Velo Consent is in the WordPress.org plugin directory. In your WordPress admin, open Plugins → Add Plugin and search for Velo Consent, then click Install Now and Activate. View on WordPress.org

Or upload the zip

If your site can’t install plugins from the directory, download velo-consent.zip below. In your WordPress admin, open Plugins → Add Plugin and click Upload Plugin at the top of the page (older WordPress versions call the menu Add New). Choose velo-consent.zip, click Install Now, then click Activate Plugin when the upload finishes. Download velo-consent.zip (v0.1.0)

WordPress Add Plugins screen with velo-consent.zip chosen
The Upload Plugin screen in WordPress 7.1, with velo-consent.zip selected and ready to install. Real WordPress capture · 9 November 2026. WordPress ↗

Connect to Velo

Open Settings → Velo Consent and click Connect to Velo. Sign in or create a free Velo account and your site is linked in one click, with no site IDs to copy. If you already have a site ID, open Enter a site ID manually, paste it and click Save.

Velo Consent settings screen with the Connect to Velo button
Settings → Velo Consent on a test WordPress site, before connecting. Real WordPress capture · 9 November 2026. WordPress ↗

Check the status and the live site

On Settings → Velo Consent, the status check should show the banner snippet as active and no other consent plugin. The plugin prints velo.js at the top of your head, so the Consent Mode v2 defaults run before any queued scripts. If you want WooCommerce, Site Kit by Google and WP Statistics to follow each visitor’s choice, install the free WP Consent API plugin as well; once it’s active, Velo passes the choice to it. Clear any page or CDN cache, then open your live site in a private window to test the banner.

Velo Consent status check: banner snippet active, WP Consent API active, no other consent plugin
The same screen after connecting. This test site has the WP Consent API plugin installed and uses Velo’s demo site ID, northwind. Real WordPress capture · 9 November 2026. WordPress ↗
Velo cookie banner on a WordPress site
The banner on the same test site, using Velo’s demo site. Your banner’s copy, layout and region settings may differ. Real WordPress capture · 9 November 2026. WordPress ↗

Prefer not to add a plugin? Paste one line in Header & Footer

Add your site’s snippet to the site-wide head with WPCode or a child theme’s header.php, then publish and test it on the live site.

Copy the line

Copy the complete installation snippet for this site from your Velo dashboard. The example below shows the format; replace your-site-id before using it. Keep the API endpoint supplied by your dashboard.

Example snippet
<script src="https://cdn.veloconsent.com/v1/velo.js" data-api="https://app-staging.veloconsent.com" data-velo-site="your-site-id" async></script>

Paste into WPCode’s Header field

In WordPress, open Code Snippets → Header & Footer in WPCode. Paste your complete Velo snippet into Header and save. This needs a plugin-enabled WordPress installation, and if your theme already loads Velo, don’t add a second copy.

WPCode: Global Header and Footer
The Header field in WPCode’s official documentation. Replace its example with the complete snippet copied from Velo. Official documentation image, reviewed 23 September 2026. WPCode documentation ↗

Publish and check the live site

Save and publish the change using the platform steps above, then clear any site or CDN cache. Open the published URL in a fresh browser session. Check the banner where your region rules require it, test accepting and rejecting, and verify consent defaults and updates before your measurement tags run. Confirm the site appears as installed in your Velo dashboard.

Use Tag Manager? Skip the code

If Google Tag Manager is already on your site, this is the easiest way to add Velo. There’s no code to touch, it takes four short steps, and all your tags stay in one place.

The complete Tag Manager guide

Add Velo to Tag Manager

Open the Velo template, click Add to workspace, then pick your container. Open the Velo template ↗

Paste your site ID

In Tag Manager, open Tags and click New. Click Tag Configuration, choose Velo CMP and paste your site ID. You’ll find it in your Velo dashboard. Leave everything else as it is.

Make it load first

Click Triggering, choose Consent Initialization – All Pages, then click Save. This lets Velo start before your other tags.

Publish and check it

Click Submit, then Publish. Preview alone doesn’t put Velo live. Then open your site in a private window, try the banner, and check that it shows as installed in your Velo dashboard.

Or hand it to an agent

Copy the prompt into Claude, ChatGPT, Cursor or whichever assistant you already use. It carries everything on this page: both routes, the order the tags have to load in, and the checks that prove it worked.

Install with AI

The prompt

Paste this prompt into your assistant, then provide your site ID and the complete installation snippet or GTM settings from your Velo dashboard.

Install prompt · WordPress
Install Velo on WordPress.

Current guide: https://veloconsent.com/wordpress

Before editing, get my site ID and complete installation snippet or GTM settings from the Velo dashboard. Confirm which consent tool and measurement tags already run on the site.

Choose one installation route:
A. If the site already uses Google Tag Manager, add the Velo CMP template (published by veloconsent) from the Community Template Gallery. Set my site ID, theme and API endpoint from the dashboard. Review the advanced options; ads_data_redaction and url_passthrough default to off. Use Consent Initialization – All Pages, then Preview and verify consent before publishing. Full steps: https://veloconsent.com/google-tag-manager

B. For direct installation: In WordPress, open Code Snippets → Header & Footer in WPCode. Paste your complete Velo snippet into Header and save. Use a plugin-enabled WordPress installation; do not add a second copy if your theme already loads Velo.

Preserve unrelated code. Avoid duplicate Velo installs or competing consent defaults. Do not assume a head placement or async loading alone guarantees tag order.

Check the published site in a fresh session. Verify the banner under the configured region rules, initial consent defaults, accept/reject updates and the velo_consent_update event. Check that non-Google tags follow their assigned categories. Test a second page and any separate checkout surface. Confirm signals reach the Velo dashboard.

Report what changed, where it changed and the result of each check. Describe any missing access or checks you could not complete.
Working with an agent that reads the web? Point it at veloconsent.com/llms.txt and /install.md for the same context in plain text.

From the journal

Notes on cookie banners, Consent Mode and the data that goes missing between them.


Do Canadian websites need Google Consent Mode v2?
V
The Velo journal11 November 2026

Google Consent Mode v2 in Velo: what is new

2 November 2026Read the post

How to add a cookie banner to WordPress without a plugin

24 September 2026Read the post

Common questions about Velo on WordPress

Do I need a WordPress plugin?

No, though the Velo Consent plugin is the fastest option. It adds the banner, configures Google Consent Mode v2, and connects to the WP Consent API in a couple of clicks. If you prefer not to add a plugin, paste one script line into your header with WPCode or a child theme, or install through Google Tag Manager.

I already run a cookie plugin like Complianz or Cookie Notice.

Deactivate it before Velo goes live. The status checklist under Settings → Velo Consent warns you if another consent plugin is active. Two banners confuse visitors, and two tools writing Consent Mode defaults send Google conflicting signals. Velo then handles the banner, the region rules and the consent record on its own.

Does it work with WooCommerce?

Yes. The banner and Consent Mode cover every page your theme renders, shop and cart included. When you use the Velo Consent plugin, it also passes each visitor’s choice to the WP Consent API, so WooCommerce, Site Kit by Google and WP Statistics follow it automatically.

Will it slow the site down?

The dashboard snippet loads asynchronously. As with any script, measure its effect on your site and check your tag order; asynchronous loading alone does not guarantee consent defaults run before other tags.

Can an AI assistant do this for me?

Yes. Copy the prompt in Install with agents, just below, into Claude, ChatGPT, Cursor or whichever assistant you already use. It carries the steps on this page, the order the tags have to load in, and the checks the agent has to run before it tells you the job is done.

Free for one site

Banner, scan and consent records for one site, free. Pro from €7 a month, plus VAT, for unlimited sites.